background image

4

5

Front Panel Buttons and LEDs

IR Eye

Input LEDs

Output Select Buttons

 

There are 6/8 Output buttons along the front panel. 

 

Pressing an output button will select the next HDMI input. 

 

A blue LED will indicate which Input has been selected for each Output. 

 

There is also an Optical IR window located on the right side of the front panel for IR remote control 
signals.

 

Video Output MUTE is indicated by the outermost LEDs remaining illuminated,  
while the inner LEDs are not.

 

Video Output Off is indicated when the innermost LEDs are illuminated, 
while the outermost are not.

 

Reset

 is optional by holding the input select buttons “1” and “4” for 10 seconds.

 

»

Successful reset indicated by reboot.

 

»

Reboot will flash all input lights on the front panel in a back and forth motion until only one 
input is selected per output.

KD-XSWRx LED Indicator Lights

 

Power:  

 

»

Color: 

Green

 

»

Solid illumination during power ON state, as provided by healthy connection with power 
supply

 

»

Steady blink if power is not adequate and/or if there is a connectivity problem with KD-
Pro6x6/8x8CC unit

 

HDMI Active (HDMI Input/Output):

 

»

Color:  

Blue

 

»

Solid illumination from active Hot Plug Detection voltage with connected display/output 
device

 

»

If Hot Plug Detection is forced to input device from Tx unit, the HDMI Active light will 
illuminate solid regardless of HDMI signal from connected device.

 

CAT5e/6 Input/Output: 

 

»

Color:  

Blue

 

»

Solid illumination from active link with KD-Pro6x6/8x8CC unit

Application Example

PC

Satellite (x3)

Cable (x3)

Ultra HD/4K

Digital Signage

WiFi Router

CA
T5e/6

Ethernet

KD-Pro8x8CC

RJ45

x8

x8

x3

x3

HDMI

HDMI

RJ45

HDMI

IR

IR

IR/RS232

iPad

KD-CSLX1

Bar Area - Mirrored Diplays 1-8

HDMI

RJ45

WiFi

Reception

HDMI

IR/RS232

CAT5e/6

KD-XSWRx

Dining 1

HDMI

IR/RS232

CAT5e/6

KD-XSWRx

Dining 2

HDMI

IR/RS232

CAT5e/6

KD-XSWRx

2nd Floor

HDMI

IR/RS232

CAT5e/6

KD-XSWRx

Restrooms

HDMI

IR/RS232

CAT5e/6

KD-XSWRx

Deck 1

HDMI

IR/RS232

CAT5e/6

KD-XSWRx

Deck 2

HDMI

IR/RS232

CAT5e/6

KD-XSWRx

Main Hall

HDMI

IR/RS232

CAT5e/6

KD-XSWRx

HDMI

RF Repeater

(Light/Shade Control)

RF

RJ45

Lights

Shades

HDMI

Up to

150 ft.

@ 4K

KD-Pro6x6_8x8CC_Manual.indd   4-5

4/25/16   5:07 PM

Summary of Contents for KD-Pro6x6CC

















Reviews: