DE - 13
Bedienungshandbuch
Die Percussion-Lautstärke stellen Sie mit dem [SOFT/NORM]- Taster ein.
Im NORMAL-Modus (LED erloschen) stellt man die Lautstärke mit dem PERCUSSION VOLUME-Parameter ein.
(siehe Abschnitt 5.5).
Im SOFT-Modus (LED leuchtet) ist die Lautstärke verringert.
Die Abklingzeit der Percussion wählt man mit dem [SLOW/FAST]-Taster.
Im SLOW-Modus (LED erloschen) stellt man die Abklingzeit mit dem DECAY-Parameter ein (siehe Abschnitt
5.5).
Im FAST-Modus (LED leuchtet) ist die Abklingzeit kürzer.
Den Percussion-Oberton wählt man mit dem [2nd/3rd]-Taster.
Im 2nd-Modus (LED erloschen) wird der zweite Oberton von der Percussion verwendet (entspricht einem 4'
Register).
Im 3rd-Modus (LED leuchtet) wird der dritte Oberton von der Percussion verwendet (entspricht einem 2 2/3'
Register).
4.4 VIBRATO ODER CHORUS
Die vorderseitige VIBRATO/CHORUS-Sektion verfügt über drei Regler, mit denen man den gewünschten Effekt
(Vibrato oder Chorus) für den Klang einstellen kann. Vibrato bewirkt eine zyklische Modulation der Tonhöhe
des Signals und verleiht dem Klang mehr Räumlichkeit und Fülle. Chorus fügt dem modulierten Signal das
Direktsignal hinzu und beeinflusst somit sowohl die Stimmung als auch die Amplitude des Signals.
Drücken Sie den [UPPER]-Taster, um den Vibrato/Chorus-Effekt auf die Upper-Sektion anzuwenden.
Zeit
Pegel
Percussion-Signalpegel
Zugriegel-Signalpegel
Zeit
Pegel
bedämpfter Percussion-Signalpegel
Zugriegel-Signalpegel
NORMAL Percussion
SOFT Percussion
Note ein
Note aus
Note ein
Note aus
Zeit
Pegel
Percussion-Signalpegel bei
normaler Abklingzeit
Zugriegel-Signalpegel
Zeit
Pegel
Percussion-Signalpegel
mit verringerter
Zugriegel-Signalpegel
SLOW Percussion
FAST Percussion
Note ein
Note aus
Note ein
Note aus