EN - 22
User Manual
described in the table at point 3
of par.3.2.
-
“
hMd
”: HALF MOON DIRECT mode, only use with a"direct" external Half Moon switch (see image
below).
-
“
hMI
”: HALF MOON INVERSE mode, only use with an "inverse" external Half Moon switch (see image
below).
6.7 CONFIGURING THE EXPRESSION PEDAL CONNECTED TO THE [EXP]
CONNECTOR
As described in par. 3.2, any type of expression pedal can be connected to the [EXP] connector on the rear
panel. There are two types of expression pedals on the market ("direct" or "inverse", see image below),
therefore when connecting a pedal it is necessary to select its type through the EXPRESSION PEDAL TYPE
function.
1.
Press the [REVERB] and [ROTARY] buttons simultaneously until the display shows the message “
EPt
”.
2.
Press [VALUE +] or [VALUE -] to select:
-
“
Pdd
”: PEDAL DIRECT mode, for "direct" expression pedals such as the Yamaha FC7 (see image
below).
-
“
PdI
”: PEDAL INVERSE mode, for "inverse" expression pedals such as the Fatar VP/25, (see also
image below).
Furthermore, it is also possible to adjust the level of the audio signal when the expression pedal is at its
minimum.
1.
Press the [REVERB] and [ROTARY] buttons simultaneously until the display shows the message “
EPM
”.
2.
Press [VALUE +] or [VALUE -] to select:
-
“
Mut
”: MUTE mode, there is no signal.
-
“
nor
”: NORMAL mode, the signal is attenuated but not muted.
Ring
Ring
HALF MOON
DIRECT
Sleeve
Tip
Tip
Sleeve
BRAKE
SLOW
FAST
Ring
Ring
Sleeve
Tip
Tip
Sleeve
BRAKE
SLOW
FAST
Ring
Ring
Sleeve
Tip
Tip
Sleeve
BRAKE
SLOW
FAST
Ring
Ring
HALF MOON
INVERSE
Sleeve
Tip
Tip
Sleeve
BRAKE
SLOW
FAST
Ring
Ring
Sleeve
Tip
Tip
Sleeve
BRAKE
SLOW
FAST
Ring
Ring
Sleeve
Tip
Tip
Sleeve
BRAKE
SLOW
FAST
Ring
Ring
Sleeve
Tip
Tip
Sleeve
PEDAL DIRECT
Ring
Sleeve
Tip
Tip
Sleeve
PEDAL INVERSE
Ring
Wiper
GND
Supply
Supply
GND
Wiper
