Key Automation PF30W Instructions And Warnings For Installation And Use Download

Page: 24 / 28

The Solarland

SLB-0112 mounting kit has been specifically design for use with the Solarland

SLP Series

10W – 25W panels. This mount is a fixed, flat or pole mount design giving a tilt angle range of 0° - 90°

Universal Flat Mount Bracket Kit

SLB-0112

Installation Manual

Step1.

Assemble the components and parts

together according to

figure 1.

We suggest you

lubricate all nuts and bolts to facilitate easy removal
at a later date.

Step2.

Attach the tilt arm and fixed bracket to the

middle part of the PV module frame using M8
module bolts and M8 mounting bolts along with
washers, lock washers and nuts.

CAUTION:

Additional mounting holes may be

required if using this mount with a panel other than
the Solarland SLP series. Great care should be
taken when drilling additional holes as damage to
the panel can easily occur, rending it useless

Step3.

To adjust the tilt angle of the PV panel,

change the location of M8 bolts in the arc hole of
the tilt arms. Remember to use lock washers to
prevent vibration from working them loose.

Step4

. For pole mounting, use hose clamps( not

included) to fix the PV module and mount assembly
securely to the pole.

See figure 2.

The U-Bolts,

Steel Clamps and Molly Bolts are not included in
the kit

www.solarland.com
[email protected]

Tel:

86-510-81191956 Fax:

86-510-85203812

Components And Parts

figure 2

figure 3

figure 1

Part

1-4

Part

1-1

Part

1-2

Part

1-3

Note:

For vertical wall mounting, drill holes on the
mounting place to be installed according to size of
the fixed bracket. Embed two M8 molly bolts into the
mounting surface.

See figure 3.

Use washers and, lock washers and nuts to secure
the PV module and mount assembly to the wall
surface.

Fixed Bracket

5052Al

Component

Material

Quantity

Part

1-2

Module Bolt(M8)

AISI304

Component

Material

Quantity

Mounting Bolt(M8)

AISI304

Component

Material

Quantity

Part

1-3-1

Part

1-4

Tilt Arm

5052Al

Component

Material

Quantity

Part

1-1

Part

Mounting Bolt(M6×20)

AISI304

Component

Material

Quantity

Part

1-3-2

The Solarland

SLB-0112 mounting kit has been specifically design for use with the Solarland

SLP Series

10W – 25W panels. This mount is a fixed, flat or pole mount design giving a tilt angle range of 0° - 90°

Universal Flat Mount Bracket Kit

SLB-0112

Installation Manual

Step1.

Assemble the components and parts

together according to

figure 1.

We suggest you

lubricate all nuts and bolts to facilitate easy removal
at a later date.

Step2.

Attach the tilt arm and fixed bracket to the

middle part of the PV module frame using M8
module bolts and M8 mounting bolts along with
washers, lock washers and nuts.

CAUTION:

Additional mounting holes may be

required if using this mount with a panel other than
the Solarland SLP series. Great care should be
taken when drilling additional holes as damage to
the panel can easily occur, rending it useless

Step3.

To adjust the tilt angle of the PV panel,

change the location of M8 bolts in the arc hole of
the tilt arms. Remember to use lock washers to
prevent vibration from working them loose.

Step4

. For pole mounting, use hose clamps( not

included) to fix the PV module and mount assembly
securely to the pole.

See figure 2.

The U-Bolts,

Steel Clamps and Molly Bolts are not included in
the kit

www.solarland.com
[email protected]

Tel:

86-510-81191956 Fax:

86-510-85203812

Components And Parts

figure 2

figure 3

figure 1

Part

1-4

Part

1-1

Part

1-2

Part

1-3

Note:

For vertical wall mounting, drill holes on the
mounting place to be installed according to size of
the fixed bracket. Embed two M8 molly bolts into the
mounting surface.

See figure 3.

Use washers and, lock washers and nuts to secure
the PV module and mount assembly to the wall
surface.

Fixed Bracket

5052Al

Component

Material

Quantity

Part

1-2

Module Bolt(M8)

AISI304

Component