background image

kewtechcorp.com

Certificate  

of Conformity &  

Warranty Registration

This instrument has been calibrated 

using equipment which has itself been 

calibrated to standards traceable to 

International Standards monitored by 

BIPM (International Bureau of Weights  

and Measures)

This certificate guarantees that the 

product has been fully inspected and 

conforms to all the relevant published 

specifications.

Free Two Year Warranty

Kewtech's Two Year Warranty enhances 

the customers' legal rights/ it covers all 

manufacturing defects for a two year 

period but Kewtech reserves the right to 

exclude abuse or accidental damage.

To register your free guarantee simply go 

to kewtechcorp.com - the link is on the 

home page.

Re-calibration Service

Regular re-calibration is recommended 

for this instrument. Kewtech recommends 

that with normal use the instrument 

is calibrated at least once in every 12 

month interval.

When the instrument is due for 

re-calibration return it to the address 

below marked for the attention of the 

Calibration Department.

Kewtech Corp Ltd

Shaw Wood Business Park

Shaw Wood Way

Doncaster DN2 5TB

t: 01302 761044

Summary of Contents for KEW 2200













Reviews: