7 of 15
6. Switch the toggle position of the charger
to the correct thickness setting for your
surface. Use desk sizer on box side to
measure.
7. Audio Confirmation Beep Configuration.
Switch your height toggle switch to calibration mode and switch back to
your original height position and listen for the number of audio beeps.
To disable or enable buzzer
Repeat the above step to disable or enable the buzzer depending on
preference. Kew Labs advises using the audio confirmation system to
start with to determine optimal phone placement accuracy.
Note:
The recalibration process or multiple calibration attempts will
toggle the audio confirmation on/off. Please adjust the buzzer configu-
ration accordingly after each calibration to your desired functionality.
Height Settings.
L 18mm - 21mm (0.71-0.83”)
H 22mm - 25.4mm (0.87-1.0”)
1 beep Disabled audio confirmation buzzer
2 beeps Enabled audio confirmation buzzer
