Under Voltage Protect (UVP), Over Voltage Protect (OVP), Over Current
Protect (OCP):
Proper power is not reaching the charger. Can be caused
by incorrect adaptor usage, overloaded multi-plug adaptor set up,
improper table thickness setting, metal objects placed very near to the
installation of charger.
Over Temp Protect (OTP):
The charger is installed at the low air
circulation area.
Phone Protect Mode:
Action when the phone is positioned closer than
the Charging distance (under 18mm).
System Fault can be used again after removing cause of occurrence,
turning power off and on.
12 of 15
SYSTEM FAULT
BUZZER INDICATION
Status
Buzzer
Power Transfer Start
Beep
Calibration Mode
Beeps occur at regular intervals.
If the phone is near center, the
beep sound interval is short.
Change Dip Switch
20/25mm
Beep: Buzzer Off
Beep-Beep: Buzzer On
(at Power Transfer Start)
