
14
15
Slew Stop Adjustment
All Kevrek Cranes fitted with a Manual Control Valve come standard with Dual Slew Stop to prevent the Boom from travelling
over the operators position. If the Crane has a Cable or Radio Remote then the procedure below may be applicable.
TO ADJUST THE POSITIONING OF THE SLEW STOP
1.
Remove Plastic Control Cover.
2.
Remove adjustable Slew Stop Bolt and replace in 1 of 4 positions.
3.
Where the rotation stop position was changed by more than 90
°
, the exit direction of the Hydraulic Hoses from the
Base may have to be redirected from left to right hand exit according to Slew Stop adjustments made.
4.
Reinstall Plastic Control Cover.
5.
Test Crane slew rotation to ensure all adjustments made were correct.
SLEW STOP ADJUSTMENT
WORM
GEAR
PLATE
GEAR
PLATE GEAR
RETAINING
BOLTS
ADJUSTABLE
SLEW STOP
BOLT
SLEW STOP LUG
(WELDED TO PLATE GEAR)
550 Series
Capacity Class
0.56Tm (5.49 kNm)
Maximum Lift Capacity
550kg @ 1.035m Radius
Standard Outreach
2.52m
With Additional Boom
N/A
Lifting Height Above Base Standard
3.25m
With Additional Boom
N/A
Outreach/Lifting Capacity
1.03m - 550kg
1.78m - 330kg
2.52m - 225kg
Slewing Torque
1.5 kNm
Slewing Angle
290°
Pump Capacity
4.9 > 7.0l/min
Oil Tank Volume
3.0l
Working Pressure
1750 PSI (120 BAR)
Power Consumption
12 volt
50 > 150 amp
24 volt
50 > 90 amp
Weight Inc/Power Pack And Oil
125kg
Weight - Manual Leg C/W Motor Mount and Storage Mount
14kg
Height Folded
1057mm
550
100
100
113
MOUNTING BASE PATTERN
260
260
=
8 X 14Ø HOLES
550
-1M
0
1M
0
1M
550 KG
1035mm
2M
3M
225 KG
2520mm
330 KG
1785mm
2M
3M
THE CAPACITY OF THIS
CRANE IS LIMITED BY
HYDRAULIC DEVICES.
TECHNICAL SPECIFICATIONS