manualshive.com logo in svg

Kettler 2 E Pro 5, Translation Of The Original Operating Instructions

Share
Download
Kettler 2 E Pro 5 Translation Of The Original Operating Instructions Download Page 75

MY20K04-2_1.0_19.08.2019

73

Before the first ride

Figure 37:

Open (2) and closed (1) clamping lever on the stem; by.schulz 
speedlifter used as an example

6.2.2

T

urning the handlebars to the side

Alternative

Open the clamping lever. 

Pull the locking lever on the stem up, and 
simultaneously pivot the handlebars into the 
desired position.

You feel the locking lever click into place.

Pull out the handlebars to the required height. 

Lock the quick release.

1

2

Crash caused by incorrectly set clamping force

Excessively high clamping force will damage the quick 
release and cause it to lose its function.

Insufficient clamping force will cause a detrimental 
transmission of force. This will cause a crash with 
injuries.

Never fasten a quick release using a tool (e.g. 
hammer or pliers).

Only use the clamping lever with the specified set 
clamping force.

CAUTION

!

EN_MY20K04-2_0.01_09.18_KETTLER  FAZUA.book  Page 73  Monday, August 19, 2019  1:53 PM

Summary of Contents for 2 E Pro 5


































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands