MY20K04-2_1.0_19.08.2019
119
Maintenance
8.1.2.9
Cleaning the drive unit
All components of the drive system must be kept in a
clean condition. Particular attention must be paid to
the contacts and interfaces between the battery and
the drive unit, and the drive unit and the bottom
bracket axle. A clean cooler on the drive unit can fulfil
its function better.
Clean all components of the drive unit carefully
using a soft, damp cloth before each use, leave to
dry completely and maintain in a clean condition.
The lock should be lubricated every two to three
months or as soon as it is no longer easy to open.
For further information concerning the maintenance of
your drive system, please contact your specialist
dealer or visit the FAZUA service platform at:
www.fazua.com/service.
Burns from hot drive
The drive cooler can become extremely hot during use.
Contact may cause burns.
Leave the drive unit to cool before cleaning.
If water enters into the drive unit, the unit will be
permanently damaged.
Never immerse the drive unit in water.
Never clean with a high-pressure water device,
water jet or compressed air.
Never use cleaning agents.
Never open.
CAUTION
!
NOTICE
EN_MY20K04-2_0.01_09.18_KETTLER FAZUA.book Page 119 Monday, August 19, 2019 1:53 PM
