MY20K04-2_1.0_19.08.2019
49
Transportation, storage and assembly
5.3
Assembly
If a fitting stand is used, it must be approved for a
maximum weight of 30 kg.
To reduce the weight, we recommend that you always
disconnect the battery from the bicycle when using the
fitting stand.
5.3.1
Required tools
The following tools are required to assemble the
bicycle:
• Knife
• Hexagon socket spanner 2 (2.5 mm, 3, mm 4 mm,
5 mm, 6 mm and 8 mm)
• Torque wrench with working range between 5 and
40 Nm
• Twelve-point square socket T25
• Ring spanner (8 mm, 9 mm, 10 mm), 13 mm, 14 mm
and 15 mm) and
• Cross, flat head and ordinary screwdriver.
Crushing caused by unintentional activation
There is a risk of injury if the drive system is activated
unintentionally.
Remove the battery if it is not absolutely necessary
for assembly.
Assemble the bicycle in a clean and dry environment.
The working environment temperature should be
between 15 °C and 25 °C.
Working environment temperature
15 °C - 25 °C
Table 24:
Working environment temperature
CAUTION
!
EN_MY20K04-2_0.01_09.18_KETTLER FAZUA.book Page 49 Monday, August 19, 2019 1:53 PM
