Kett LE-330J, Operating Manual

Page: 27 / 40

27
Step Operation Display
1
2
To Continuous Mode To Hold Mode
(6) CONT (Changing the Measurement Value Display Mode)
You can switch the measurement value display mode between the Hold
(fixed value display) and Continuance (continuous monitoring) modes.
• The Continuance Mode is used in cases such as the measurement
of coatings on complexly shaped objects in which measurement
values have a tendency to be unstable. This allows you to obtain
stable measurement values and makes statistical processing easier
and more reliable.
<Making Measurements in the Continuance Mode>
Press the tip of the probe against the surface to be measured and
wait for the value shown in the display to stabilize, then press the
key. The value displayed at that point will be stored in memory as the
measured value.
<Making Calibrations in the Continuance Mode>
Use the key as described above when performing steps
7
,
!
,
%
and
(
of the standard foil calibration procedure.
• You can switch back and forth between the Hold and Continuance
modes by repeating this key operation procedure.