25
■ Communication setting
Set the port for communication with the PC software.
Either the USB port or LAN port can be selected.
For the LAN port, LANTRONIX’s XPort is employed.
For how to use the PC software, refer to the PC software operating manual.
* To cancel the setting during operation, press the [EXIT] key. Then, the previous screen will be restored.
Step
Display
Operation
①
1 . C H
P A R A M E T E R
2 . C H
D U P L I C A T E
3 . C H
R E S E T
4 . C O M
S E T T I N G
▶
5 . P A S S
C O D E
6 . X P O R T
S E T U P
M O D E
● Select the communication setting.
Press the [MENU] key, and enter the pass code.
Move the cursor to [4. COM SETTING] with [
⬆
]/[
⬇
] key.
Then, press the [ENTER] key to set the code.
②
4 . C O M
S E T T I N G
C O M
▶
U S B
X P O R T
▶
O K
▶
C A N C E L
▶
4 . C O M
S E T T I N G
C O M
◀
U S B
▶
L A N
▶
● Set the communication.
Either [USB] or [LAN] can be selected by pressing the
[ENTER] key while [COM] is selected.
Select [USB] or [LAN] using
[
⬆
]/[
⬇
]
key, and press the
[ENTER] key to set.
③
4 . C O M
S E T T I N G
C O M
▶
U S B
X P O R T
▶
O K
▶
C A N C E L
▶
4 . C O M
S E T T I N G
M A C
A D D R E S S
× × × × × × × × × × × ×
I P
A D D R E S S
× × × . × × × . × × × . × × ×
O K
▶
● Check the XPORT setting.
The XPORT setting can be checked by pressing the
[ENTER] key while [XPORT] is selected.
* Checking the XPORT setting is necessary when using the
LAN port for communication. For details, refer to the PC
software operating manual (2-2. Setting XPORT).
MAC ADDRESS and IP ADDRESS will be displayed.
Pressing the [ENTER] key will restore the communication
setting screen.
④
4 . C O M
S E T T I N G
C O M
▶
U S B
X P O R T
▶
O K
▶
C A N C E L
▶
4 . C O M
S E T T I N G
C O M
▶
U S B
X P O R T
▶
O K
▶
C A N C E L
▶
● Save the communication setting.
When setting is completed, move the cursor to [OK] with [
⬇
]
key. Pressing the [ENTER] key will restore the menu screen
after saving the communication settings.
* The menu screen will be restored if the [ENTER] key is
pressed while [CANCEL] is selected.
* Note that if the [ENTER] key is pressed while [CANCEL] is
selected, the setting will not be saved.
