31
voICe management
For each of the voices of the instrument,
right, left and bass
, not only can you define the
sound
preset
, but you can also define the octave, the volume and enable or disable the mute
function. The procedure that follows explains how to change the parameters of a voice.
•
Press the key related to the voice to be changed
(right, left, bass)
. The LED blinks to
point out that the part is in
edit
status and can be changed.
•
To change a
timbre
, simply enter the number of the
preset
on the numerical keypad 0-9
or scroll using the
value +/-
keys.
•
To change the
octave
, hold the key of the voice down
(right, left or bass)
and press
the
value+
or
value-
keys. When changing the octave, the display will show the letter ‘o’
followed by a numerical value, which indicates the alteration value made (Range -2,+2).
•
The
volume
of the current voice can be changed on the potentiometer 2 (Voice) on the
instrument panel. Each time the potentiometer is moved, the display will show the value
of the volume of the voice selected for a few seconds.
•
To activate the
mute
function, simply disable the voice by pressing the corresponding key
(right, left or bass)
.
THE PRESETS
The 128
presets
of the instrument are split-up as follows:
•
From 1 to 64, Presets that can be edited but not overwritten.
•
From 65 to 128, Presets that can be edited and overwritten.
You can change one of the first 64 Presets, but when you save it, it must be saved in a location
from 65 to 128. The sound
presets
can be pulled-up from the panel using the numerical
keypad 0 – 9 or by scrolling with the
value +/-
keys. You can obviously pull-up the sound
preset
via a Midi program change. You can change the timbre of each voice by selecting it
from one of the 128
presets
available.
re-CallIng a preset
Proceed as follows to assign a sound
preset
to one of the three voices:
o Select the voice where you wish to load the
preset
by pressing one of the
right,
left or bass
keys.
o Enter the number of the
preset
on the numerical keypad or scroll with the
value
+/-
keys.
ChangIng a preset
As already mentioned, each sound
preset
may comprise a maximum of 3 different sounds.
To change or create a new
preset
, follow the procedure below:
•
Select the
preset
to be changed using the numerical keypad 0-9 or the
value +/-
keys.
•
Press the “
edit
” button to access the related mode. The display will show some dashes “--
-” and the
right, left and bass
LEDs will blink to point out that you need to select which
sound of the
preset
you wish to change.
•
Select one of the three sounds making up the Preset by pressing one of the
right, left
or bass
keys.
attention
: in this mode, the
right, left and bass
keys do not have their
Summary of Contents for sd4
Page 1: ...MANUALE DI ISTRUZIONI OWNER S MANUAL BENUTZERHANDBUCH MANUEL D INSTRUCTION...
Page 2: ......
Page 86: ......
