28
•
when the led blinks,
it means that the part selected is in Edit mode. In this case, the
display shows the number of the sound
(preset)
selected and, by entering a number
on the numerical keypad or by pressing the
value+/-
keys, you can change the current
sound.
•
when the led is oFF
it means that the section is not enabled (no sound will be generated
for the related voice).
•
when the led is on
, it means that the section is enabled.
If all 3
right, left or bass
voices are disabled, the display will show three dashes “---” to
point out that the instrument is disabled. All the operating parameters of the device can be
customized and saved in one of the
32 users
available. When SD4 is switched on, it always
loads the parameters related to
user number 1
. In default conditions,
user 1
is set in
master
keyboard
operating mode. By connecting a Midi keyboard on the
midi In 2
port
(voice)
, you
can therefore start to play with the built-in voices of the instrument.
operatIng modes
sd4
works with two separate Midi input ports and, based on the operating mode selected,
these ports can be used to connect independent Sequencers (to play Midifiles or other MIDI
sequences) or to connect MIDI accordions, Master keyboards, etc. with which you can control
the three
right, left or bass
voices of the instrument. To make
sd4
easier to use, KETRON
has pre-arranged 4 different preset operating modes.
desCrIptIon oF the operatIng modes.
Here’s a short description of the instrument’s operating modes.
•
master keyboard mode
In this mode, the
mIdI In 1
port is used to play Midifiles while the
mIdI In 2
port is used to
connect a Master keyboard. The receiving channel on the MIDI IN2 port is the MIDI
global
channel (default setting: 1).
Depending on the split point, using the master keyboard you can control one or more
voices of
sd4
. By activating the individual voices using the corresponding keys on the
panel of SD4
(left – right – bass),
the split point is set automatically. For example, if
you activate just one voice, the master keyboard will play throughout its full extension,
whereas if you activate at least 2 voices, the split point will be set automatically. To
change the split point, press the “
lead off
” and “
save
” keys together at the same time
and select the note using the master keyboard or the “
value +/-
” keys.
•
accordion mode
In this mode, the
mIdI In 1
port is used to play Midifiles, while the
mIdI In2
port is used
Summary of Contents for sd4
Page 1: ...MANUALE DI ISTRUZIONI OWNER S MANUAL BENUTZERHANDBUCH MANUEL D INSTRUCTION...
Page 2: ......
Page 86: ......
