Prima messa in funzione
89 / 148
2019/04
4
Prima messa in funzione
Per la descrizione dello schema di co5.6do, vedi 5.6
Al momento della prima messa in funzione vengono richieste le seguenti immissioni:
1. lingua di visualizzazione del display
2. Data / Ora
3. Tipo di prodotto*
4. Intervallo di manutenzione
* Quando il prodotto viene usato come centralina di ridondanza (con impianto di sollevamento hybrid Ecolift XL), viene
scelto come tipo di prodotto: Centralina di ridondanza. Altrimenti le due centraline non verranno collegate. Seguire le
istruzione presso l´impianto di sollevamento hybrid.
4.1
Esecuzione dell‘inizializzazione
• Alimentare la tensione elettrica al quadro elettrico, viene eseguito
l‘autotest con le seguenti fasi
– Attivazione allarme blackout-batteria
– Si accende il LED verde Pronto funzionamento <19>
– Il clapet antiriflusso si chiude elettricamente e poi si riapre (LED
giallo <22> Clapet antiriflusso lampeggia durante il movimento
della cerniera e si spegne quando il clapet antiriflusso è aperto)
– Menu 3.10
Lingua
viene visualizzato
Se sul display non viene visualizzata la prima messa in funzione (menu 0.1. Lingua), il quadro elettrico è già stato
configurato. In questo caso i parametri impostati devono essere controllati o devono essere ripristinate le impostazioni
di fabbrica (punto 3.11, Azzera5.6to, nel capitolo 5.6).
Dopo il ripristino delle impostazioni di fabbrica viene visualizzata automaticamente la prima messa in funzione del
quadro elettrico.
I contatori dell‘intervallo di manutenzione e i cicli di commutazione non vengono considerati nell‘azzeramento.
• Premere il tasto OK <69>, si attiva la retroilluminazione del display
• Selezionare la lingua nazionale e salvare, il menu
Data/Ora
viene visualizzato
• Impostare la data e l‘ora (formato 24 ore) e salvare, il menu
Tipo di prodotto
viene visualizzato
• Selezionare il tipo di prodotto, salvare e seguire le indicazioni sul display fino a che il menu
Intervallo di
manutenzione
viene visualizzato
• Selezionare l‘intervallo di manutenzione o impostarlo in modo personalizzato e salvare, viene eseguito l‘autotest. Si
accendono i LED alternativamente mentre vengono controllati i componenti elettrici (sonda e clapet antiriflusso). Poi
viene visualizzato per qualche secondo* il menu Informazioni sul sistema, la prima messa in funzione è conclusa
* Dopo il quadro elettrico passa alla modalità di funzionamento automatica
FLAP
19
Ill. [13]