Kessel Comfort PLUS, Original Operation Manual

Page: 45 / 108

Installation and operating manual 45 010-700_01
Connect the mains cable 400V (
➲
“Fig. [16]”)
• Lay the connection cable through the housing openings up to the terminal
clamps and main switch.
• Establish the connections in accordance with the connection diagram (in the
housing cover of the control unit).
• Tighten the cable screw connection so that the seal is guaranteed.
Mains cable 230V
• The control units are ready to plug in
Installing the control unit for the redundant flap (option)
When used with Pumpfix/Ecolift XL in the version with two motor-driven flaps,
connect the redundant connection in accordance with theinstructions for the
redundant control unit to the terminal block “LIN-BUS”.
Fig. [16]
Connection overview for the mains cable 400V
Source
Connection
cable
Type of
conductor
Label
Connection
name
Mains 5-pole
Protective
earth
yellow/green PE
Neutral blue N
Phase L1 T1
Phase L2 T2
Phase L3 T3
5
PE N
T1 T2 T3