Kessel 93007/120D, Installation And Operating Instructions Manual

Page: 21 / 116

1 Notes on this manual
The following conventions make it easier to navigate the manual:
Symbol Explanation
[1] See Figure 1
(5) Position number 5 from the adjacent figure
...
Action step in figure
Check whether manual operation has been
activated.
Prerequisite for action
Press OK.
Action step
System is ready for operation.
Result of action
see "Safety", page 22 Cross-reference to Chapter 2
Bold type Particularly important or safety-relevant information
Italics Variants or additional information (e.g. applicable only for ATEX variants)
Technical information or instructions which must be paid particular attention.
The following symbols are used:
Icon Meaning
Isolate device!
Observe the instructions for use
CE marking
Warning, electricity
WARNING
Warns of a hazard for persons. Disregarding
this warning can lead to very serious injuries or death.
CAUTION
Warns of a hazard for persons and material. Disregarding
this warning can lead to serious injuries and material damage.
EN
010-224 Installation and operating instructions 21 / 116