4. Service and maintenance
Fig. 13 shows the Komfort variant
Lock both sides!
Fig. 15
Probe test
Fig. 14
Locking lever
muff
Fig. 16
Motor installation
4.4 Pump removal:
The pump can be removed individually.
To do this, turn both pump removal levers
through 180°. This makes them fold out-
wards to the side so that the pump can be
lifted out.
4.5 Motor installation:
The levelled drive shaft of the motor must
be in a vertical position (as delivered).
Move the locking lever of the operating
valve on the locking cover to the “CLO-
SED” position, insert the drive motor into
the drive groove from above, and screw
in place using the four M5 x 12 screws
(TX25) on the locking cover (Fig. 16).
4.6 Removing motor ground installation
In this case, the outlet cover must be dis-
mantled to remove the motor. To do this,
open the locking lever and take the out-
let muff out. Loosen levers
②
and
③
and
remove the bypass muff, to do this tilt
pump connection muff
④
away or remo-
ve the pump if necessary. After removing
the two cover locking levers
⑤
the outlet
cover can be removed. Now the motor
can be screwed off.
Pump remo-
val lever
Pump remo-
val lever
❶
❷ ❸
❹
❺
Locking lever
muff
19
010-843EN_2013_10_205-054 02/07 -1 15.10.13 11:21 Seite 7
Summary of Contents for 83071
