background image

 

 

 

 

3.0 Safety instructions 

It is recommended that users of this machine are not under the influence of alcohol, 
prescription medication or harmful substances and are physically and mentally capable 
to operate the machine 

 

To keep the risk of accidents as low as possible, please refer to the following sub- 
sections. 

 

 

3.1  General information 

 

 

This symbol indicates a WARNING. Failure to follow the instructions can result in serious 
personal injury and / or property damage. 

 

 

Before starting, read these operating instructions as well as the safety instructions in the 
operating instructions of the carrier vehicle carefully. 

 

 

3.2  Proper use 

 

 

The weed brush is designed for use with a Kersten single axle tractor. 

 

The machine is designed for use in highway, agriculture and forestry such as, for example, 
Green area and plant maintenance, for the removal of wild herbs, moss and path edges. 

 

Any use beyond this is deemed to be not intended. The manufacturer is not liable for damages 
resulting from this and is liable on the operator alone. 

 

The intended use also includes the observance of the operating, maintenance and maintenance 
conditions stipulated by the manufacturer. 

 

The attachment equipment may only be used, maintained and repaired by persons who are 
familiar with this and are aware of the dangers. 

 

The relevant accident prevention regulations as well as other generally recognized safety and 
occupational medical regulations must be observed. 

 

Unauthorized modifications to the machine lead to the exclusion of liability of the manufacturer 
for damages resulting therefrom. 

 

 

3.3  General safety and accident prevention regulations 

3.3.1  Basic rules 

 

 

Observe the safety instructions in the operating instructions of the carrier vehicle! 

 

In addition to the instructions in this manual, observe the general safety and accident 
prevention regulations! 

 

Only trained personnel or persons are allowed to use this machine! 

 

Incorporation into rotating parts causes severe injuries. The operator must ensure that no 
persons or animals enter. 

 

When using the equipment on public transport, the provisions of national road traffic 
regulations, e.g. Reflector, lighting. 

 

The wearer's clothing should be tight. Avoid loose clothing and wear solid shoes or safety 
shoes! 

 

Only work with good visibility and light conditions! 

 

Place the attachments in difficult-to-reach areas and ensure that no one is in danger. 

Kersten 

Summary of Contents for WKB 60 M-U 70




















Reviews: