Kersten WKB 60 M-U 70, Original Operating Manual

Page: 9 / 19

9
English
•
Do not make adjustments to the attachment during operation - Risk of accident!
•
Transport of persons and objects is prohibited!
•
If, for example, the attachment unit had detected a foreign object and blocked it, the auxiliary
drive train should be switched off, the engine must be switched off and the ignition key
removed. Subsequently, the attachment unit can be freed from foreign bodies with a suitable
tool! The work must be carried out carefully and carefully, as the components may be clamped
together and may give a sudden impact.
•
In the event of damage, stop the attachment and repair the damage.
•
If the attachment vibrates strongly, immediately stop the machine and, if necessary, have the
fault rectified by a specialist. Do not continue!
3.3.5 Maintenance, cleaning and repair work
•
Only the work described in these operating instructions may be carried out for the maintenance
and care of the weed brush.
•
Perform maintenance, cleaning, and repairs only when the drive is switched off and the engine
is at rest!
•
If protective devices and working tools are subject to wear, they must be checked regularly and
replaced if necessary.
•
Damaged brush elements must be replaced.
•
When replacing brush elements, use a suitable tool and wear protective gloves.
•
Only use original spare parts from the manufacturer as these correspond to the technical
requirements and therefore the risk of accidents is minimized!
•
Perform cleaning work with the high-pressure cleaner so that the water jet is not held directly in
bearings, rotating parts, grease nipples, shaft seal rings, wheel hubs, etc. After each cleaning
with the high-pressure cleaner, the lubrication points must be greased. In the case of an
infringement, the claim for guarantee performance ceases.
•
Check the moving parts for smooth operation and grease them if necessary!
•
After maintenance and cleaning work, the protective devices must be re-installed and put into
the protective position!
•
To avoid a fire hazard, keep the machine clean!
•
Regularly check the nuts and bolts for tightness and retighten if necessary.
•
hen carrying out maintenance, cleaning and repair work on the lifted unit, always make sure
that it is secured by means of suitable support elements!
•
Before carrying out any repairs, make sure that the hydraulic system is depressurized, as
pressurized fluids can penetrate the skin and cause serious injuries! In case of such injuries
consult a doctor immediately - risk of infection!
•
Repairs may only be carried out by specialists.
•
Periodically inspect hydraulic hose lines for damage and aging and replace if necessary. At the
latest after 6 years of operation, re-create all hose lines! The date of manufacture is stamped on
the hose line.