2018-12-18
54 / 74
Front sweeper FKM 60
Service
ENG
Automatic height adjustment
The automatic height adjustment ensures the optimum sweeping level during
operation and thus ensures a good sweeping result with low wear.
The KM-Control can adjust the sweeping roller height by a hydraulic drive on the
height adjustment (see chapter 6.1.1 Adjusting the height of the sweeping roller
on page 46).
Two modes can be switched on via the illuminated pushbuttons (2, 3) of the KM-
Control. The green illuminated pushbutton (3) activates an automatic system with
low pressure on the sweeping roller. The red illuminated pushbutton (2) can also
be activated and increases the pressure on the sweeping roller.
Manual height adjustment
Note
Only when both switches for automatic height adjustment (2, 3) are switched off
If necessary, the height of the sweeping roller can be adjusted manually.
About the two buttons (4, 5), the sweeping roller can be moved manually in
height.
Summary of Contents for FKM 60
Page 74: ...2018 12 18 74 74 ENG...
