Kersten FKM 60, Operating Manual

Page: 48 / 76

2018-12-18 48 / 74
Front sweeper FKM 60
Service ENG
6.1.2 Setting the speed of the sweeping roller
The speed of the sweeping roller can be adjusted via the flow control valve on the
hydraulic block. (Exception: with the additional option "KM-Control" the speed
setting is not possible!)
6.1.3 Pivoting the sweeping roller
The sweeper can be swung laterally to the left or right according to the resulting
work. This pivoting device is intended in particular for free-lance operation.
Depending on the equipment of the machine, this is done mechanically by hand or
hydraulically
Manual adjustment
Fig. 20: Swing sweeper
1
Pivot
2 Socket pins
The sweeper can be swiveled by ± 30 ° around the swivel joint (1). Remove the
locking pin (2) from the manual adjustment. Swing the sweeper into the desired
position and secure the manual adjustment again with the locking pin (2).
Hydraulic side adjustment without solenoid changeover valve
Actuate the appropriate hydraulics of the host vehicle to pivot the machine to the
desired position.