Mähraupe HyCut
Maintenance
DE
2021-01-27
55 / 65
7.9
Cleaning the machine
When cleaning the HyCut tracked mower, the following points must be observed.
WARNING
Risk of injury / risk of environmental damage due to the transmission of
electrical current during cleaning work!
There is a risk of injury and environmental and material damage (on the machine)
if electrical current is transmitted during cleaning work!
•
Personal protective equipment, in the form of close-fitting workwear, safety
shoes, protective glasses and protective gloves, must be worn.
•
High-pressure cleaners should under no circumstances be used to clean
the tracked mower.
•
Clean machines with flowing water (from a hose without a nozzle
attachment) and brushes.
•
When outside of closed areas, the machine can also be cleaned with
compressed air. Protective clothing in the form of protective eyewear and
respirators, if necessary, must be worn. Care to must be taken to ensure
that flying particles of contaminants or dirt do not injure anyone.
7.10 Measures after maintenance has been performed
Personnel:
•
Private and commercial operators
Perform the following steps after the maintenance work has been completed and
before the machine is turned off:
1.
Check that all previously loosened screw connections have been tightened.
2.
Check to ensure that all previously removed safety devices and covers have
been put back into place correctly.
3.
Ensure that all tools, materials and other equipment used has been removed
from the work area.
4.
Clean the work area and remove any substances, such as liquids,
processing material or similar, that may have been produced.
5.
Ensure that all of the machine’s safety devices function flawlessly.
