Kernau KIH 7432-2B, Instructions For Use And Installation, Page: 32 / 84

32
5. STARTING-UP AND APPLIANCE MANAGEMENT
BEFORE THE FIRST USE
Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent. This may cause
blue-tinted colour on the glass surface.
INDUCTION PRINCIPLE
An induction coil is located under each heating zone. When it is engaged, it produces a variable
electromagnetic field which produces inductive currents in the ferromagnetic bottom plate of the pan. The
result is a heating-up of the pan located on the heating zone.
Of course, the pan has to be suitable:
•
All ferromagnetic pans are recommended (please test to see if it attracts a magnet): cast iron and
steel pans, enamelled pans, stainless-steel pans with ferromagnetic bottoms…
•
NOT suitable: copper, pure stainless-steel, aluminium, glass, wood, ceramic, stoneware,…
The induction heating zone adapts automatically to the size of the pan. Pans with too small diameter may not
work. This diameter is varying in relationship to the heating zone diameter.
SENSITIVE TOUCH
Your induction hob is equipped with electronic controls with sensitive touch keys. When your finger presses
the key, the corresponding command is activated. This activation is validated by a control light, a letter or a
number in the display and/or a “beep” sound.
For normal use, press only one key at any time.
POWER SELECTION ZONE “SLIDER” AND TIMER SETTING ZONE
To select the power with the slider, slide your finger on the “
SLIDER
” zone. You can also directly access a
particular level if you put your finger directly on the chosen level.
STARTING-UP
•
Start up / switch off the hob
ACTION CONTROL PANEL DISPLAY
To start Press key [ ] [ 0 ]
To stop Press key [ ] Nothing or [ H ]
Power selection zone “SLIDER” and timer
setting
“SLIDER“
Direct access