KERN AEJ_N, Operating Instructions Manual

Page: 58 / 85

58 AEJ_N/AES_N-BA-e-1321
13.2 Weighing with tolerance range
For weighing with tolerance ranges you can enter individual upper and lower limits.
For tolerance controls such as dosaging, apportioning or sorting the scale will display
violated upper or lower limits and show the tolerance tag.
The triangular tolerance marker (

) in the upper part of the display shows whether
the goods to be weighed are within the two tolerance limits.
The tolerance marker is only in operation during operating mode tolerance weighing;
it is otherwise not visible.
The tolerance marker provides the following information:
lo Goods to be weighed below tolerance limit
ok
Goods to be weighed within tolerance
range
Hi Goods to be weighed above tolerance limit
0.0000 �
g
Lo
Hi
ok