KEPCO ATE 100-10DMG, Operator'S Manual

Page: 18 / 98

1-2
ATE-DMG OPER 020613
addition, output voltage and current can also be controlled by external analog reference volt-
ages (see PAR. 3.5).
TABLE 1-1. ATE-DMG D-C OUTPUT RATINGS AND OUTPUT IMPEDANCE
MODEL
d-c OUTPUT RANGE OUTPUT IMPEDANCE VOLTAGE MODE OUPUT IMPEDANCE CURRENT MODE
VOLTS AMPS SERIES R
SERIES L
(1)
SHUNTR
(2)
SHUNT C
(3)
SLOW FAST SLOW FAST
SIZE “E” FULL-RACK (1000 Watt)
ATE 6-100DMG 0-6 0-100 1.2
µΩ
0.5
µ
H 5
µ
H 12k
Ω
22000
µ
F 15
µ
F
ATE 15-50DMG 0-15 0-50 6
µΩ
0.5
µ
H 5
µ
H 30k
Ω
12000
µ
F 6
µ
F
ATE 25-40DMG 0-25 0-40 12.5
µΩ
1
µ
H 10
µ
H 50k
Ω
11000
µ
F 4
µ
F
ATE 36-30DMG 0-36 0-30 24
µΩ
1
µ
H 10
µ
H 72k
Ω
9500
µ
F 3
µ
F
ATE 55-20DMG 0-55 0-20 55
µΩ
2
µ
H 20
µ
H 110k
Ω
5200
µ
F 2.25
µ
F
ATE 75-15DMG 0-75 0-15 0.1m
Ω
2
µ
H 20
µ
H 150k
Ω
3400
µ
F 1.5
µ
F
ATE 100-10DMG 0-100 0-10 0.2m
Ω
4
µ
H 40
µ
H 200k
Ω
1200
µ
F 0.75
µ
F
ATE 150-7DMG 0-150 0-7 0.42m
Ω
4
µ
H 40
µ
H 300k
Ω
1050
µ
F 0.3
µ
F
(1) For determining dynamic impedance in voltage mode.
(2) Based on 0.5mA load effect in FAST mode.
(3) For determining dynamic impedance in current mode.
TABLE 1-2. ATE-DMG SERIES SPECIFICATIONS
SPECIFICATION RATING/DESCRIPTION CONDITION
INPUT CHARACTERISTICS
A-C Voltage nominal: 104, 115, 208, 230Va-c User selectable, See PAR. 2.3
Tolerance: ± 8.7%
Frequency nominal: 50, 60 Hz
Tolerance: ± 3Hz
Current 20A a-c maximum Max load, 125V a-c
OUTPUT CHARACTERISTICS
d-c Output Series Pass Transistor
Type of Stabilizer Automatic crossover Voltage/Current
Voltage 0 to 100% of rating
Current 0 to +55oC 0-100% of rating Usable range limited to approximately 1% to 100%.
+55 to +65oC 0-90% of rating
Static Specifications See Table 1-5
Dynamic Specifications See Table 1-3
Error sense 0.5V per load wire (0.25V for 6V
model) Voltage allowance
Isolation Voltage 500V d-c or peak Between each output terminal and chassis ground
Leakage current Output to Ground 5 microamperes max. rms at 115V a-c
50 microamperes max. p-p at 115V a-c
Software Overvoltage
Protection (OVP) See Table 1-4 and PAR. 3.4.3. Digital setting, local or remote.
Action: crowbar the output.