KEP ES-756, Installation & Operating Instructions Manual

Page: 16 / 22

12
DISPLAY REMARKS
STEP
3
SET TING
LOCK
This section of the menu is used to set
up the lockout type and code.
LC PG = Locks program but presets
are accessible.
LC ALL= Locks program & presets.
Press the PRGM button to toggle be-
tween choices; Press RST/ENTER to
enter displayed choice.
When CODE is displayed, press any
key to view existing lock code. To
change the code press the key under
each digit to be changed. Press RST/
ENTER to enter displayed value.
input
RELAYS
LoC
LC PG
or
LC ALL
or or
CoDE
Press any key to view
or change the lock
code
PRESS
This section of the menu is used to set
up important operating variables.
RDEC= rate decimal location; Press
the key under the digit with the desired
lo ca tion. Press the "E" key if a decimal
is not desired. Press RST/ENTER to
enter the dis played location.
SET HI= Rate value for the highest
input (5 or 10V; 20mA).(i.e. 20mA =
500 lbs/hr.). Key in the desired high
value and press RST/ENTER to enter
dis played value.
input
RELAYS
LoC
SETuP
rDEC
SET Hi
Press any key to view
or change existing
value
CONTINUED ON NEXT PAGE
STEP
4
SET TING
SETUP
PRGM
PRGM
ENTER
ENTER
ENTER
PRGM
PRGM
PRGM
PRGM
PRGM
ENTER PRGM