X-W 3 2 0 (En)
2 1
1
M ake “Playback (recording) preparation”.
!
2
(Load a disc in the CD player.)
3
Adjust the recording level.
^
Press the O.T.E. key w hile the CD player is in stop mode to perform “All-track recording” of a CD at the same time as playing it.
Please note that the O.T.E. recording is not possible w ith an LD player.
Preparation
1
Select the disc.
÷
When a “ M ulti-disc CD player” is in use, select the desired disc.
3
2
O.T.E.
Press the O.T.E. key.
Stop playing the CD.
Lights up.
O.T.E.
Synchro playback/recording
CD all-track recording (O.T.E.) (Deck B only)
÷
The cassette deck performs the ARM operation for about 8 seconds,
then starts recording. The CD player starts playback at the same time.
÷
At the end of tape side A, the music is not recorded on the guide (leader)
tape section. If you w ant to prevent a track from being interrupted in the
middle, record the interrupted track at the beginning of tape side B
according to the instructions in
“How to record”
.
To stop recording in the middle
2
3
7
÷
Pressing the
7
key of the CD player stops the CD player and the
cassette deck.
÷
Pressing the
7
key of the cassette deck also stops the cassette deck
and CD player.
http://www.usersmanualguide.com/
