X-W 3 2 0 (En)
7
Cleaning the heads and peripheral com-
ponents
For maintaining the best condition of the deck and
for longer service life, alw ays keep the head (record-
ing/playback/erase), capstan and pinch roller clean.
To clean them, perform the follow ing:
1. Open the cassette holder.
2. Using a cotton sw ab dipped in alcohol, clean the
head (recording/playback/erase), capstan and
pinch roller carefully.
Demagnetizing the head
When the recording/playback head is magnetized,
the sound quality w ill be deteriorated. In such a
case, demagnetize the head using a commercially
available demagnetizer (head eraser).
Capstan
There are precisely aligned parts around
the heads, including the tape guides.
When cleaning, pay special attention so
as not to apply shock to them.
Cotton sw ab
M aintenance
Pinch roller
Tape guides
Head
Note
Note
Bew are of condensation
When w ater vapor comes into contact w ith the surface of cold
material, w ater drops are produced.
If condensation occurs, correct operation may not be possible, or
the unit may not function correctly.
This is not a malfunction, how ever, and the unit should be dried.
(To do this, turn the POWER sw itch ON and leave the unit as it is for
several hours.)
Be especially careful in the follow ing conditions:
¶
When the unit is brought from a cold place to a w arm place, and there
is a large temperature difference.
¶
When a heater starts operating.
¶
When the unit is brought from an air-conditioned place to a place of
high temperature w ith high humidity.
¶
When there is a large difference betw een the internal temperature of
the unit and the ambient temperature, or in conditions w here conden-
sation occurs easily.
WARNING NOTICE:
IN M OST CASES IT IS AN INFRINGM ENT OF COPYRIGHT
TO M AKE COPIES OF TAPES OR DISCS WITHOUT THE
PERM ISSION OF THE COPYRIGHT OWNERS. ANYONE
WISHING TO COPY COM M ERCIALLY AVAILABLE TAPES
OR DISCS SHOULD CONTACT THE M ECHANICAL COPY-
RIGHT PROTECTION SOCIETY LIM ITED OR THE PER-
FORM ING RIGHTS SOCIETY LIM ITED.
Dolby noise reduction and HX Pro headroom extension manufac-
tured under license from Dolby Laboratories Licensing Corporation.
HX Pro originated by Bang & Olufsen.
“ DOLBY” , the double-D symbol and “ HX PRO” are trademarks of
Dolby Laboratories Licensing Corporation.
Temperature
The appliance may not function properly if used at extremely low , or
freezing temperatures. The ideal ambient temperature is above
+ 5
°
C (41
°
F).
Cleaning the head section
Cleaning
Unplug this appliance from the w all outlet before cleaning. Do not
use volatile solvents such as alcohol, paint thinner, gasoline, or
benzine, etc. to clean the cabinet. Use a clean dry cloth.
Caution against contact revitalizer
Do not use contact cleaners because it could cause a malfunction.
Be specially careful against contact cleaners containing oil, for they
may deform the plastic componente.
Unplug pow er cord
Reference notes
Information that you should know on cassette deck and tape
http://www.usersmanualguide.com/
