TKR-850
6
3. External Speaker (KES-4 or KES-5)
The TKR-850 has a internal built-in speaker (5W/8
Ω
), and
the external speaker output from the TEST/SPKR connector
(15-pin) on the rear of the radio is 4W/4
Ω
. Use external
speaker KES-4 or KES-5.
3-1. Connection for the KES-4 or KES-5 With the TKR-850
■
When taking the AF output from the TEST/
SPKR connector (15-pin) on the rear of the radio
The following tools are required for changing the connec-
tor.
• Extracting tool
The following extracting tool is recommended :
Molex Inc. Order No. : J5800-002 (W05-0878-00)
1. Remove the connector with jumper from the external
speaker connector on the rear panel of the radio. (Fig. 4-1)
Note : Save the jumper, which is required when the radio
is used without the external speaker.
2. Remove the terminals with the jumper from the connec-
tor housing holes number 9 and 12 using the extracting
tool.
Removing the jumper lead (Fig. 4-2)
1) Insert the extracting tool (J5800-002) into the connec-
tor while pushing the jumper lead in the direction of
(a).
2) Push the extracting tool into collapse the barbs of the
crimp terminal.
3) Pull out the lead while continuing to push the extracting
tool in the direction (b).
3. Reinsert the terminal with the black and white stripe lead
into hole number 12, and the terminal with the black lead
into hole number 6. (Fig. 4-3)
4. Attach the connector to the external speaker connector on
the radio.
CN601
CN603
CN604
CN605
CN606
R653
SB
SB
8C
R742
1
14
PTO
TX-RX unit (B/2)
Control section
Component side
TXO (MIC signal output)
TXI (MIC signal input)
RXO (RX audio signal output)
AC (Audio control signal output)
BC1 (Scramble code output 1)
BC2 (Scramble code output 2)
BC3 (Scramble code output 3)
BC4 (Scramble code output 4)
PTI (PTT signal input)
CLRC (Clear code for scrambler)
RXI (RX audio signal input)
PTO (PTT signal output)
NC
GND
CN601
1
14
Voice
scrambler
Display
unit
8C
PTO
Display unit (A/2)
Foil side
Fig. 1
Fig. 3
Fig. 2
INSTALLATION
