Kenwood TK-782, Service Manual, Page: 9 / 91

8
TK-782
"
Operator Selectable Tone
When this key is pressed, the “OST” appears and encode/
decode QT/DQT is switched to the OST tone pair. If pressed
again, the “OST” display goes off and encode/decode QT/
DQT returns to transceivers preset.
When this key is held down for one second, the trans-
ceiver enters “OST select mode”. In this mode, the display
shows OST No. or OST name which is set to the channel and
operator can select one of OST tone pair using [Channel up],
[Channel down] key.
If pressed this key again, the displayed OST code is memo-
rized to the channel, the transceiver exits from the OST se-
lect mode, returns to normal channel display and “OST” dis-
play.
16 kinds of OST tone pairs can be programmed in the
operator selectable tone window. While in the OST select
mode, the transceiver does not look back at the priority chan-
nel in the scan resume mode.
"
Queue
Press [Queue] key to toggle Queue mode on or off. When
it is on, you will see the contents of the queue buffer. You
can scroll the queue buffer using the [Channel up], [Channel
down] or [2]/[8] keys on the microphone.
When you are in Queue mode, [D] or [6] key to toggle the
Selcall and Status displays. When you are in Queue mode,
press the [C] or [4] key to toggle the Code and Selcall/Status
displays.
Hold down the [D] or [6] key to delete the top stack of the
Queue buffer. Hold down the [C] or [4] key to cancel Queue
mode and return to normal operation.
"
Radio Password
Backup is done even if the power supply is cut off. A lock
is not canceled unless a proper password is inputted. The
character which can be inputted is to 6 digits with the num-
ber of 0 to 9. A lock is canceled if it is the same as code set
up at “Optional feature - Radio password”.
If the entered radio password is incorrect, the “Key input
error tone” sounds and the transceiver remains in “LOCK1”
screen.
"
Scan
Press the [Scan] key to toggle scanning the channels on
and off. When the transceiver is scanning, “Revert channel
display” is temporary disabled and the SCN icon and
“
#
SCAN
#
” appear.
"
Scan Delete/Add
Press the [Scan del/add] key to temporarily delete or add
each channel from/to the scan list. When a channel is added
to the scan list,“
” appears on LCD.
When the transceiver exits Scan mode, the added or de-
leted channels are erased from the scan list. The original
scan list is restored.
OPERATING FEATURES /
"
"
"
"
"