TK-7360/7360H/7360H
(
V
)
37
ADJUSTMENT
Common Section
Item
Condition
Measurement
Adjustment
Specifi cations /
Remarks
Panel tuning mode
PC test mode
Test-
equipment
Unit
Terminal
Unit
Parts
Method
1. Setting
1) Power supply voltage
DC power supply terminal: 13.6V
2) SSG standard modulation
[Wide] MOD: 1kHz, DEV: 3kHz
[Narrow] MOD: 1kHz, DEV: 1.5kHz
2. Receive
Assist
Voltage
(Automatic)
1) Adj item: [RXASS]
Adjust:
[
∗∗∗∗
]
2) TEST CH: Low,
Low’, Center, High’,
High (5 points)
3) Press [
] key to
store the adjust-
ment value.
1) (Auto tuning)*
Power
meter
FPU
“Voltage Level”
indicator on PC win-
dow shows VCO
lock voltage.
Change the adjust-
ment value to get
VCO lock voltage
within the limit of
the specifi ed volt-
age.
Note:
Confi rm the VCO
lock voltage ap-
proximately 3
seconds after the
adjustment value is
changed.
2.5V±0.2V
3. Transmit
Assist
Voltage
(Automatic)
1) Adj item: [TXASS]
Adjust:
[
∗∗∗∗
]
2) TEST CH: Low,
Low’, Center, High’,
High (5 points)
3) PTT: ON
4) Press [
] key to
store the adjust-
ment value.
1) (Auto tuning)*
2) Transmit
4. VCO Lock
Voltage
Check
•
RX
1) Adj item: [RXASS]
Adjust:
[
∗∗∗∗
]
2) TEST CH: Low,
Low’, Center, High’,
High (5 points)
1) TEST CH: Low,
Low’, Center, High’,
High (5 points)
Power
meter
DVM
TX-RX LV
Check
2.5V±0.2V
• TX
3) Adj item: [TXASS]
Adjust:
[
∗∗∗∗
]
4) TEST CH: Low,
Low’, Center, High’,
High (5 points)
5) Transmit
2) TEST CH: Low,
Low’, Center, High’,
High (5 points)
3) Transmit
*: At test mode, click [Tune Assist Voltage] button in test mode dialog box, then start automatic adjustment of Receive/Transmit assist voltage.
Transmitter Section
Item
Condition
Measurement
Adjustment
Specifi cations /
Remarks
Panel tuning mode
PC test mode
Test-
equipment
Unit
Terminal
Unit
Parts
Method
1. Frequency
1) Adj item: [FREQ]
Adjust:
[
∗∗∗
]
2) PTT: ON
3) Press [
] key to
store the adjust-
ment value.
1) TEST CH: TX center
2) Transmit
Frequency
counter
ANT
[Panel
tuning
mode]
[ ],[ ]
[PC test
mode]
FPU
Adjust to center
frequency
Within ±100Hz
2. High Trans-
mit Power
•
TK-7360
1) Adj item: [HPOW]
Adjust:
[
∗∗∗∗
]
2) TEST CH: Low,
Low’, Center, High’,
High (5 points)
3) PTT: ON
4) Press [
] key to
store the adjust-
ment value.
1) TEST CH: Low,
Low’, Center, High’,
High (5 points)
2) Transmit
Power
meter
Ammeter
25W
±1.0W
8.0A or less
• TK-7360H/
7360H(V)
50W
±2.0W
14.0A or less
