Kenwood TK-5310, Service Manual, Page: 55 / 97

TK-5310
55
ADJUSTMENT
•Narrow 3) Adj item:[N Balance] Deviation Panel ANT Set it to the adjustment
(Concentric SW:B) meter Universal value obtained from
Oscilloscope connector the [WC Balance]
AG adjustment of step
AF VTVM 2), using the [C] and
•P25 4) Adj item:[A Balance] [D] keys.
(Concentric SW:C) After setting the
adjustment value,
press [B] key.
The adjustment
value will be stored
in memory.
6. Max DEV 1) Adj item:[W FM Max Dev] Panel [C],[D] 4.0kHz ±50Hz
adjust Adjust:[***] (According to the
•Wide AG:1kHz/150mV at MIC terminal , -)
(Concentric SW:A) Deviation meter filter
LPF:15kHz
HPF:OFF
2) Adj item:[WL FM Max Dev]
t
[WLC FM Max Dev]
t
[WC FM Max Dev]
t
[WCH FM Max Dev]
t
[WH FM Max Dev]
Adjust:[***]
PTT:ON
Press [B] to store the adjustment
value after adjustment.
•Narrow 3) Adj item:[N FM Max Dev] 2.0kHz ±50Hz
(Concentric SW:B, C) Adjust:[***] (According to the
PTT:ON , -)
Press [B] to store the adjustment
value after adjustment.
7. P25 high 1) Adj item:[A APCO Hi Dev] Power meter Panel ANT Panel [C],[D] 2827Hz 2771~2883Hz
deviation Adjust:[***] Deviation Universal
adjust Deviation meter filter meter connector
LPF:3kHz Oscilloscope
HPF:OFF AG
2) Adj item:[AL APCO Hi Dev]
t
AF VTVM
[ALC APCO Hi Dev]
t
[AC APCO Hi Dev]
t
[ACH APCO Hi Dev]
t
[AH APCO Hi Dev]
PTT:ON
Press [B] to store the adjustment
value after adjustment.
Measurement Adjustment
Item Condition Test-
Unit Terminal Unit Parts Method
Specifications/Remarks
equipment