TK-2217
16
DISASSEMBLY FOR REPAIR /
维修拆卸
Disassembly Procedure
■
Removing the case assembly from the chassis
1. Remove the volume knob
z
and channel knob
x
.
2. Remove two screws
c
.
3. Lift and remove the chassis from the case assembly
v
.
(Use a flat-head screwdriver to easily lift the chassis.)
■
Removing the LCD ASSY from the mounting
hardware
1. Remove the sheet attached to the flat cable connector
b
.
2. Remove the FPC from the flat cable connector
n
.
Note:
Be careful not to forget to attach the sheet after the
LCD ASSY is reassembled.
3. Insert a flat-head screwdriver on the right side of the
illumination guide
m
, then lever the screwdriver to remove
the right side of the illumination guide from the mounting
hardware
,
.
4. Slide the LCD ASSY
.
to the right so that two tabs on the
left side of the illumination guide are removed from the
mounting hardware
/
.
1
3
3
4
2
6
5
7
8
Sheet
绝缘片
Mounting hardware /
固定硬件
Illumination guide /
照明导向器
Sheet /
绝缘片
9
10
拆卸程序
■
从机体上拆卸机壳
1. 拆卸音量旋钮
z
和信道旋钮
x
。
2. 拧下 2 个螺丝
c
。
3. 从机体拉出并卸下机壳。
v
(使用平头螺丝刀容易拉出机壳。)
■
从固定硬件上拆卸 LCD 组件
1. 拆卸被加到扁平电缆连接器上的薄片。
b
2. 从扁平电缆连接器上卸下FPC。
n
注∶
注意不要忘记在 LCD 组件被重新组装之后加装薄片。
3. 把平头螺丝刀插到照明导向器
m
的右侧，然后扳动螺丝刀
拆卸固定硬件上的照明导向器的右侧。
,
4. 把 LCD 组件
.
向右滑动，以便从固定硬件上卸下照明导向
器左侧的2个卡头。
/
