TK-2217
19
DISASSEMBLY FOR REPAIR /
维修拆卸
■
Attaching the positive terminal to the chassis
Always attach the positive terminal to the chassis, using
the following procedures, before mounting the TX-RX unit onto
the chassis.
1. Remove the holder assembly
x
from the packing
z
of
the positive terminal.
2. Mount the packing of the positive terminal into the chassis
hole
c
.
3. Mount the holder assembly into the packing of the positive
terminal
v
.
■
Mounting the chassis to the case assembly
1. Confirm that the waterproof packing attached to the
circumference of the chassis is securely inserted in the
groove of the chassis
z
.
2. Attach the speaker to the speaker recess of the case
assembly
x
. Make sure the speaker is securely inserted.
3. Insert the upper part of the chassis into the case assembly
c
.
Note:
Take care that the speaker lead wire is not caught by
the microphone element.
4. Press the chassis
v
and the case assembly together to
attach them.
■
把正极端子安装到机架
把TX-RX单元组装到机架之前，必须按照以下的顺序把电池
正极端子安装到机架 ,
1. 从正极端子的垫片
z
上取下机架
x
。
2. 把正极端子的垫片安装到机架孔上。
c
3. 把支架安装到正极端子的垫片上。
v
■
安装机壳机架
1. 确认机架四周的防水垫是否确实进入机壳的槽里。
z
2. 把扬声器安装到机壳的扬声器安装部
x
，确保扬声器确实地
镶嵌好。
3. 把机架上部插到机壳里。
c
注∶
请不要让扬声器引线勾住麦克风元件。
4. 按压机架
v
，使机架和机壳成为一个整体。
3
2
1
4
1
2
Confirm that the
waterproof packing is
securely inserted in the
groove of the chassis.
确认防水垫是否确实
地进入机架的槽里。
