Kenwood ProTalk XLS TK-3230 Instruction Manual Download Page 43

Page: 43 / 61

ompAnder

The compander (compressor/expander) allows higher clarity

of signals, avoiding excessive noise and interference. When

activated, transmitted signals are compressed before being

sent and received signals are expanded when they arrive.

Press the

MENU

key 4 times.

Press the

key to select “CP-oF” (compander off) or

“CP-on” (compander on.

Press the

MENU

key 1 time, or press the

PTT

MON

, or

CAL

key to confirm the selection and return to operating

mode.

ock

You can lock the

MENU

, and keys to prevent

accidentally changing the operating mode and channel

settings. The

Power

switch/

Volume

control and

PTT

CAL

and

MON

still function normally.

Press and hold the

MENU

key for 3 seconds to lock or unlock

the transceiver keys.

• The icon appears on the display when the transceiver keys are

locked. No icon appears when they are unlocked.

Summary of Contents for ProTalk XLS TK-3230






























































Search results

Summary of Contents for ProTalk XLS TK-3230

Reviews:

Related manuals for ProTalk XLS TK-3230

Brands by name

Popular brands

Kenwood ProTalk XLS TK-3230, Instruction Manual

Search results

Summary of Contents for ProTalk XLS TK-3230

Reviews:

Related manuals for ProTalk XLS TK-3230

Brands by name

Popular brands