8
BASIC OPERATIONS
1
Turn the
Power
switch
/ Volume
control
clockwise to switch the transceiver power
ON.
• A beep sounds if enabled by your dealer.
2
Press the key programmed with the
Monitor
or
Squelch Off
(
Side 2
key default)
function
to hear background noise, then rotate the
Power
switch
/ Volume
control to adjust the
volume.
3
Rotate the
Channel
selector to select your
desired channel.
• When you receive an appropriate signal, you
will hear audio from the speaker.
4
To make a call, press and hold the
PTT
switch, then speak into the microphone using
your normal speaking voice.
• Hold the microphone approximately 3 to 4 cm
(.5 inches)
from your lips.
5
Release the
PTT
switch to receive.
Note:
When the battery pack voltage becomes too low, transmission
will stop and an alert tone will sound.
Summary of Contents for ProTalk TK-3301
Page 32: ......
