2
CHANNEL OPERATING FREQUENCIES
To change the operating frequency of a channel:
1
With the transceiver power OFF, press and hold the
PTT
switch and
Side 1
key while turning the transceiver power
ON.
• Continue to hold the
PTT
switch and
Side 1
key until the LED
lights orange and the transceiver announces “Self”.
2
Release the
PTT
switch and
Side 1
key.
• The transceiver announces “Channel”.
3
Press and release the
PTT
switch, then rotate the
Channel
selector to your desired channel.
• Upon pressing and releasing the
PTT
switch, a beep will sound
and the transceiver announces “Table zero”.
4
Press the
Side 1
or
Side 2
key to increment/ decrement the
Table number, to select the new channel frequency.
• Table numbers and their corresponding operating frequencies
are provided in the table on page 3.
• A voice announcement will inform you of the currently selected
Table number.
5
Press the
PTT
switch within 5 seconds to save the setting,
otherwise the operation will cancel.
• A beep will sound.
• Repeat steps 3 to 5 to set up another channel.
6
Turn the transceiver power OFF and then ON again to
activate the new settings.
Note:
The transceiver will automatically return to normal operation
if no action is performed for 5 seconds.
Summary of Contents for ProTalk TK-3301
Page 32: ......
