9
VOICE OPERATED TRANSMISSION (VOX)
VOX operation allows you to transmit hands-free. VOX can
only be used if you are using a supported headset. This
function can be turned off for specific channels by your dealer.
To activate VOX and set the VOX Gain level, perform the
following steps:
1
Connect the headset to the transceiver .
• The VOX function does not activate when a headset is not
connected to the accessory terminal of the transceiver.
2
With the transceiver power OFF, press and hold the
Side 1
key while turning the transceiver power ON.
3
Continue to hold the
Side 1
key until a beep sounds.
• The LED indicator lights turn orange.
• When the
Side 1
key is released, the transceiver will announces
the VOX Gain level.
4
Press the
Side 1
key to increase the VOX Gain level and
the
Side 2
key to decrease the level.
• The VOX Gain level can be adjusted from level to 0 and OFF.
• The transceiver announces the VOX Gain level as you adjust it.
If OFF is selected, a beep sounds.
5
Press the
PTT
switch
to save the setting.
• A beep will sound.
• The transceiver announces the new VOX Gain level.
6
Turn the transceiver power OFF and then ON again to
activate VOX.
Note:
If a headset is connected to the transceiver while the VOX
function is switched ON and the VOX Gain level is configured to a
higher, more sensitive level, louder received signals may cause the
transceiver to start transmission.
Summary of Contents for ProTalk TK-3301
Page 32: ......
