4
4
Press and release the
PTT
switch, then rotate the
Channel
selector to your desired channel.
• Upon pressing and releasing the
PTT
switch, a beep will sound
and the transceiver announces “Tone one”.
5
Press the
Side 1
or
Side 2
key to increment/ decrement the
Tone number, to select the new tone or code.
• QT/DQT table numbers and their corresponding tones/ codes
are provided in the table on page 5.
• Press and hold the
Side 1
or
Side 2
key to increment/
decrement the Tone number by 5 at a time.
• A voice announcement will inform you of the currently selected
Tone number.
6
Press the
PTT
switch within 5 seconds to save the setting,
otherwise the operation will cancel.
• A beep will sound.
• Repeat steps 4 to 6 to set up another channel.
7
Turn the transceiver power OFF and then ON again to
activate the new settings.
Note:
The transceiver will automatically return to normal operation
if no action is performed for 5 seconds.
Summary of Contents for ProTalk TK-3301
Page 32: ......
