9
BASIC OPERATION
POWER ON
Turn the
Power
switch
/ Volume
control clockwise to switch the
transceiver power ON.
• Power-on tone will sound.
ADJUST THE VOLUME
Rotate the
Power
switch
/ Volume
control to adjust the volume.
• Clockwise increases the volume and counterclockwise decreases the volume.
Note:
◆
To adjust the volume using background noise as a reference in Analog mode, use the
[Monitor]
or
[Squelch Off]
function.
SELECT A ZONE
Press and hold the
Side 1
button for 1 second to increase the
Zone number (Zone 1
Zone 2
Zone 3
Zone 4
Zone 1).
Press and hold the
Side 2
button for 1 second to decrease the
Zone number (Zone 4
Zone 3
Zone 2
Zone 1
Zone 4).
•
Side 1
and
Side 2
buttons are the default settings.
SELECT A CHANNEL
Rotate the
Selector
to select your desired channel.
MAKE A CALL
Press and hold the
PTT
switch, then speak into the microphone
using your normal speaking voice.
• Hold the microphone approximately 3 to 4 cm (1.5 inches)
from your mouth.
Release the
PTT
switch to receive.
Note:
◆
When the battery pack voltage becomes too low, transmission will stop and an alert
tone will sound.
