23
CHANNEL SETUP
Frequency Setup
To set the Frequency
1
During CHANNEL SETUP, rotate the
Selector
to select a channel number.
• The transceiver announces the zone number and channel number.
2
Press the
Side 1
or
Side 2
button to select the Frequency Setup Mode.
• The transceiver announces “Channel”.
3
Press the
PTT
switch to enter the Frequency Table Selection.
• The transceiver will announce the current frequency table number.
4
Press the
Side 1
or
Side 2
button to increment/ decrement the frequency table
number, to select the new channel frequency.
• A voice announcement: “Table X” (X = 1 to 27 for VHF, X = 1 to 99 for UHF).
• A voice announcement will inform you of the currently selected frequency
table number.
• Table numbers and their corresponding operating frequencies are provided
} {UHF: p.
}.
• Press and hold the
Side 1
or
Side 2
button to increment/ decrement the
frequency table number by 5 at a time.
5
Press the
PTT
switch to temporary save the selected frequency table number.
• Beep B (2 beeps) will sound.
• Repeat steps 1 to 5 to set up another channel.
6
Press the
Side 1
or
Side 2
button to select the Confirmation Setup Mode.
• The transceiver announces “Confirm”.
7
Press the
PTT
switch to save the settings and return to the ID SETUP/ ZONE
SELECTION.
• Beep B (2 beeps) will sound.
• Turn the transceiver power OFF and then ON return to normal operation
with new settings.
Note:
◆
If no action is performed for 20 seconds, the transceiver will automatically return to
normal operation without changing any settings.
