43
OTHER PROGRAM FUNCTIONS
The following program functions are set by your dealer.
SECOND PTT
By pressing this button, you can use the same operation as
PTT
switch to move to
a different channel (Second PTT Channel) from the standby channel and transmit.
• Second PTT Channel can be set for each zone.
• When starting transmission on the Second PTT Channel, the Second Channel
Tone will sound.
Note:
◆
Combined with Second Channel Scan, the transceiver scanning the standby channel
and Second PTT Channel at any time.
◆
To use the Second Channel Scan, the Scan Type must be set to “Second Channel”.
CW MESSAGE
Allows you to send the configured CW Message.
Press this button
to send configured CW Message (Morse code).
FIXED VOLUME
Allows you to change the volume level of the beep tone.
Press this button
to change the volume level Low, High, or Off (tone Off).
RX/TX FREQUENCY SCAN
This function is for the repeater operation. The transceiver can receive uplink
signal directly even outside the repeater coverage area.
Press or hold this button to activate scan on the channel.
• The LED blinks blue and Beep A (1 beep) sounds.
In RX/TX Frequency Scan mode, press or hold this button to end scan.
• Beep B (2 beeps) sounds and the LED will stop blinking blue.
ZONE SELECT
Switches the Zone number instead of the Channel number by using the
Selector
.
