36
To set the functions of the Side 1 and Side 2 buttons
1
With the transceiver power OFF, press and hold the
Side 1
and
Side 2
buttons
while turning the transceiver power ON.
• Continue to hold the
Side 1
and
Side 2
buttons until the LED lights yellow
and the transceiver announces “Setup”.
2
Release the button.
3
Press and hold the button to be reprogrammed (either the
Side 1
or
Side 2
button).
• The transceiver will announce “Table 0”.
- The selection table number starts from “Table 0”, not the current table
number.
4
Release the button.
5
Press the
Side 1
or
Side 2
button to increment/ decrement the
table
number, to
select the new button function.
• Table numbers and their corresponding functions are provided in the table
{p.
• A voice announcement will inform you of the currently selected table
number.
6
Press the
PTT
switch to save the settings.
• Beep B (2 beeps) will sound and the transceiver will announce the new
table number.
7
Turn the transceiver power OFF and then ON again to activate the new settings.
Note:
◆
If no action is performed for 20 seconds, the transceiver will automatically return to
normal operation without changing any settings.
