Kenwood ProTalk DIGITAL NX-P1200NV User Manual Download Page 27

Page: 27 / 51

TX Setup

When Channel Type is “Mixed” (Dual), set to “Analog” or “NXDN” (Digital) for

Transmit Mode.

To set the Transmit Mode

During CHANNEL SETUP, rotate the

Selector

to select a channel number.

• The transceiver announces the zone number and channel number.

Press the

Side 1

Side 2

button to select the TX Setup Mode.

• The transceiver announces “TX Mode”.
• If the Frequency of the currently selected channel is set to “Off”, the TX

Setup Mode cannot be selected.

• If the Channel Type is set to “Analog” or “NXDN” (Digital), the TX Setup

Mode cannot be selected.

Press the

PTT

switch to enter the Transmit Mode Selection.

Press the

Side 1

Side 2

button to select the Transmit Mode.

Transmit Mode Voice Announcement

Description

Analog

TX Mode Analog

Transmitting in Analog.

NXDN

TX Mode Digital

Transmitting in Digital.

Press the

PTT

switch to temporary save the selected Transmit Mode.

• Beep B (2 beeps) will sound.
• Repeat steps 1 to 5 to set up another channel.

Press the

Side 1

Side 2

button to select the Confirmation Setup Mode.

• The transceiver announces “Confirm”.

Press the

PTT

switch to save the settings and return to the ID SETUP/ ZONE

SELECTION.

• Beep B (2 beeps) will sound.
• Turn the transceiver power OFF and then ON return to normal operation

with new settings.

Note:

◆

If no action is performed for 20 seconds, the transceiver will automatically return to
normal operation without changing any settings.

Summary of Contents for ProTalk DIGITAL NX-P1200NV




















































Search results

Summary of Contents for ProTalk DIGITAL NX-P1200NV

Reviews:

Related manuals for ProTalk DIGITAL NX-P1200NV

Brands by name

Popular brands

Kenwood ProTalk DIGITAL NX-P1200NV, User Manual

Search results

Summary of Contents for ProTalk DIGITAL NX-P1200NV

Reviews:

Related manuals for ProTalk DIGITAL NX-P1200NV

Brands by name

Popular brands