(No.RA073<Rev.001>)1-15
(7) Attach the MOLDING COVER of the radio accessory to the
chassis, and tighten the 2 screws.
(8) Attatch the other side of the KCT-71 or KCT-77 to the KCH-
20R REMOTE CONTROL HEAD, KCH-21R HANDHELD
CONTROL HEAD.
For the installation method, refer to the service manuals of
the KCH-20R or KCH-21R.
2.3.2 Ignition Sense Cable (KCT-18: Option)
The KCT-18 is an optional cable to use the following functions:
Ignition function
The ignition function allows you to turn the radio's power on and
off with the ignition key of your car.
2.3.2.1
Connecting the KCT-18 cable to the radio
(1) Insert the KCT-18 lead terminal into pin 1 (IGN) of the
Socket (9-pin) NX-5700HB accessory.
(2) Connect the socket (9-pin) to the connector (9-pin) for
accessory on the front of the radio.
2.3.2.2
Connecting the KCT-18 cable to the
KCH-20R Remote Control Head
When connecting the KCT-18 to the KCH-20R, the KCT-72
connection cable is used.
(1) To connect the KCT-72 to the KCH-20R, modify (cut) the
waterproof packing of the KCT-71 (KCH-20R side). The
cutting position and procedure of the KCT-71 waterproof
packing are the same as "2.3.1.2 Connecting procedure of
the REMOTE CONTROL CABLE for Dual Head system".
Refer to the "2.3.1.2 Connecting procedure of the
REMOTE CONTROL CABLE for Dual Head system".
(2) Combine the modified KCT-71 and KCT-72.
Plug the connector of the KCT-72 into the hole of the
modified KCT-71waterproof packing.
(3) Insert each of the 2 connectors of the KCT-71 and KCT-72
made in step (2) into the KCH-20R.
(4) Insert the KCT-18 lead terminal into pin 1 (IGN) of the
socket (12-pin) KCT-72 accessory.
(5) Connect the socket (12-pin) made in step(4) of the KCT-18
to the KCT-72 of the control head.
Screw
MOLDING COVER
1
7
9
3
KCT-18
Socket (9-pin) NX-5700HB accessory
KCT-72 connector
Modified KCT-71
Note: Flatten swelling of the
waterproof packing.
Slide and lock
Socket (12-pin) KCT-72 accessory
KCT-18
Summary of Contents for NX-5700HB
Page 74: ...MEMO ...
Page 105: ...MEMO ...
