2
PREPARATION
I
NSTALLING
/ R
EMOVING
THE
(O
PTIONAL
) B
ATTERY
P
ACK
1
Match the guides of the
battery pack with the grooves
on the upper rear of the
transceiver, then firmly press
the battery pack in place.
2
Lock the safety catch to
prevent accidentally releasing
the battery pack.
3
To remove the battery pack,
lift the safety catch, press the
release latch, then pull the
battery pack away from the
transceiver.
Note:
◆
For battery pack charging procedures and useage, refer to the
battery charger Instruction Manual.
◆
Before charging a battery pack that is attached to the
transceiver, ensure that the safety catch is firmly closed.
◆
While operating the transceiver using a Li-ion battery pack in
areas with an ambient temperature of –10°C/ +14°F and lower,
operating time may be shortened.
I
NSTALLING
THE
(O
PTIONAL
) A
NTENNA
Screw the antenna into the
connector on the top of the
transceiver by holding the
antenna at its base and turning
it clockwise until secure.
1
2
3
Optional
antenna
Summary of Contents for NEXEDGE NX-410
Page 44: ......
