16
S
CAN
R
EVERT
The Scan Revert channel is the channel selected when you
press the
PTT
switch to transmit during scan. Your dealer can
program one of the following types of Scan Revert channels:
•
Selected:
The last channel selected before scan.
•
Se Talkback:
Same as “Selected”, plus you can
respond to calls on the channel at which scan is paused.
•
Priority 1/ Priority 2:
The Priority channel (either Priority 1
or Priority 2) .
•
Priority 1 + Talkback/ Pri Talkback:
Same as
“Priority 1/ Priority 2”, plus you can respond to calls on the
channel at which scan is paused.
•
Last Selected:
The last channel on which you
receive a call.
S
CAN
D
ELETE
/A
DD
You can add and remove zones and/or channels/group IDs to
and from your scan list.
1
Select your desired zone and/or channel/group ID.
2
Press the key programmed as
Zone Delete/Add
(to
add/remove zones) or
Scan Delete/Add
(to add/remove
channels/group IDs).
•
You can also press and hold the key programmed as
Scan
Delete/Add
to add/remove zones.
P
RIORITY
-C
HANNEL
S
ELECT
If the Priority channel has been set as Operator Selectable by
your dealer, you can reprogram the Priority channels.
1
Select your desired zone and channel/group ID.
2
Press the key programmed as
Priority-channel Select
.
3
Press /
to select “NORMAL”, “PRIORITY 1” (
),
“PRIORITY 2” (
), or “PRIORITY 1&2” (
).
4
Press to save the setting and exit.
Summary of Contents for NEXEDGE NX-410
Page 44: ......
