40
KVT-719DVD/729DVD
/729DVDY/739DVD
2-4-5. Tuner
• When unable to access E2PROM, display Error (Tuner
screen).
• K3I forced switching
Force to narrow by pressing and holding Preset4.
:
xxx.x1MHz
Force to middle by pressing and holding Preset5.
:
xxx.x2MHz
Force to wide by pressing and holding Preset6.
:
xxx.x3MHz
• Switch Span (K
↔
M) with [SRC] key + [VOL.DW] key +
[Reset] key. (In the KOS series, use [VSEL] key + [VOL.
DW] key + [Reset] key)
Span information is displayed on the Information screen.
• In the Tuner source, P-CON is turned OFF when “RDS
PS” is “RDS_TEST”.
2-4-6. TV Tuner
• If destination is E, set the TV2 default value to “Area
5 (Russia), 8ch (191.25MHz)” (when KTC-V500 is
connected).
• If destination is E, set the TV2 default value to “Area
4 (Russia), 8ch (191.25MHz)” (when KTC-V300 is
connected).
• HPOSI adjustment mode shall be TV1.
If started up as above, even if the test mode is cleared
by ACC, Power OFF
→
ON, setting values are retained.
(Default value is resumed by Reset.)
2-4-7. DVD
• Use CD media KTD-02A and DVD media TDV-540A/
TTD-100 and play back in the order of sequence shown
in the following Table.
• When Loading, set to Title1-Chapter1.
• Set region code at the position for the time code.
• Title3-Chapter16 (Monoscope) is directly selected by
pressing Tenkey4 while adjusting HPOSI.
• CDDA checking (KTD-02A)
Use “Track UP/DW” to play back in the order of sequence
as shown: 1
↔
9
↔
15
↔
10
↔
11
↔
12
↔
13
↔
14
↔
9
↔
1 · · ·
Track 28 is directly selected by pressing [RDM] key.
• DVD audio/video checking (TDV-540A)
Use “Chapter UP/DW” to play back in the order of
sequence as shown in Tables 2-4-3 and 2-4-4.
Use M/S (AM-) on the remote controller to switch Video/
Audio.
For DVD video checking
Title Chapter
Audiostream1
1
1
Audiostream1
3
6
Level
Audiostream1
3
7
S/N
Audiostream1
3
17
AM/PM noise
Audiostream1
3
8
Frequency
characteristics
Audiostream1
3
12
Color
measurement
Audiostream1
4
1
1kHz, 0dB
PCM96k/24bit
Audiostream3
4
6
17Hz
PCM96k/24bit
Audiostream3
Table 2-4-3 DVD Video checking
For DVD audio checking
Title Chapter
Audiostream1
1
1
Audiostream3
4
1
1kHz, 0dB
PCM96k/24bit
Audiostream3
4
6
17Hz
PCM96k/24bit
Audiostream3
4
16
44kHz
PCM96k/24bit
Audiostream3
4
2
Infi nity
PCM96k/24bit
Audiostream3
4
3
L
PCM96k/24bit
Audiostream3
4
4
R
PCM96k/24bit
Audiostream3
4
1
1kHz, 0dB
Dolby
Audiostream1
4
2
Infi nity
Dolby
Audiostream1
Table 2-4-4 DVD Audio checking
2-4-8. Audio
• Default setting of Volume should be Step30.
• BAL/FAD setting is changed among MIN
↔
CENT
↔
MAX
by 1 click.
• Xover setting is changed between MIN
↔
MAX by 1 click.
• Tone setting is changed among MIN
↔
CENT
↔
MAX by 1
click.
• The default setting of Tone (EQ) should be Flat.
• The default setting of System Q should be Off.
• When there is Digital Out terminal, setting should always
be the output On setting.
• Default setting of Line Mute should be On.
2-4-9. AVIF
• Default setting of Interruption of AVIN should be On.
• Default setting of R-CAM Interruption should be On.
• Normally an interruption occurs when the R-CAM is
detected.
• The Reverse condition is always set at On (R-CAM is
available in V.SEL).
TEST MODE
